INP:TIM
OUTP:TIM
Set the cutoff time.
Command
INPut[:STATe]:TIMer[:STATe] {<numeric>|MINimum|MAXimum}
OUTPut[:STATe]:TIMer[:STATe] {<numeric>|MINimum|MAXimum}
INPut[:STATe]:TIMer[:STATe]?
OUTPut[:STATe]:TIMer[:STATe]?
Parameter
Value | 0 to 3599999 (0: function off) |
Resolution | 1 |
Unit | S |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the cutoff time in the NR3 form in response to INP:TIM/OUTP:TIM?