FUNC:SST
PLZ-4W series: Set the soft start time for CC mode or CR mode.
PLZ-4WL series: Set the soft start time for CC mode.
Command
[SOURce:]FUNCtion:SSTart {<numeric>|MINimum|MAXimum}
[SOURce:]FUNCtion:SSTart?
Parameter (PLZ-4W/ PLZ-4WH)
Value | 0.001(default), 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2 |
Unit | S |
Table shows the setting that is specified when *RST or *RCL is sent.
Parameter (PLZ-4WL)
Value | 0(Off), 0.0001(default), 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02 |
Unit | S |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the soft start time in the NR3 form in response to FUNC:SST?