FUNC:RESP:CV (PLZ-4WH series only)
Set the transient response speed for CV mode.
Command
[SOURce:]FUNCtion:RESPonse:CV {<numeric>|MINimum|MAXimum}
[SOURce:]FUNCtion:RESPonse:CV?
Parameter
Value | 0.01, 0.1, 1, 10, 100 |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the transient response speed of CV mode in the NR3 form in response to FUNC:RESP:CV?