FUNC:RESP (PLZ-4W/ PLZ-4WH series only)
Set the transient response speed of CC/CR mode.
Command
[SOURce:]FUNCtion:RESPonse {<numeric>|MINimum|MAXimum}
[SOURce:]FUNCtion:RESPonse?
Parameter
Value | 0.1, 0.2, 0.5, 1.0 (Default: 1.0) |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the transient response speed in the NR3 form in response to FUNC:RESP?