CURR:PROT:ACT
Sets whether to turn off the load or limit the current when the OCP trips.
Command
[SOURce:]CURRent:PROTection:ACTion {LIMit|TRIP}
[SOURce:]CURRent:PROTection:ACTion?
Parameter
Value | LIMit | Limit the current when the OCP trips. |
TRIP | Turn off the load when the OCP trips. |
Table shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the OCP operation setting in the CHAR form in response to CURR:PROT:ACT?