Kikusui Electronics Corp. :: Commnunication Interface Mannual

INIT:NAME

Starts the trigger function.

If the trigger source parameter is IMM, the measurement starts immediately. If set to BUS, the measurement starts after waiting for a software trigger.

Command

INITiate[:IMMediate]:NAME {TRANsition|OUTPut|ACQuire}

Parameter

Value	TRAN	Starts the trigger function of the sequence 1 group.
	OUTP	Starts the trigger function of the sequence 2 group.
	ACQ	Starts the trigger function of the sequence 3 group.

Introduction

Installing the VISA library
Interface Setup

Command Syntax
Parameters
Default settings

IEEE488.2 Common Commands
Output Setting
Protection and Clear the Alarm
System Configuration
Preset Memory Function
Setting Changes using triggers
Output On/Off Delay
Measurement
System
Register

A C F I M
O S T V *

SOURce
OUTPut
MEASure and FETCh
TRIGger
MEMory/ SENSe
SYSTem
STATus
IEEE488.2 Common Command
List (PDF)

A List of Errors
Processing time of main command

Turning the Power On and Resetting the Instrument
Output programming
Using Triggers
Status Monitoring
Error Checking
Visual Basic 2008