Command (Subsystem)
SYSTem Subsystem
SYST:BACK | Saves the panel settings and configuration settings |
---|---|
SYST:COMM:TRAC | Communication error trace function |
SYST:DISP:CONT | Sets the measured value that is shown on the display |
SYST:DISP:HOLD | Sets the holding of displayed values |
SYST:ERR | Reads the oldest error information |
SYST:KLOC | Locks the KPM1000 panel operations |
SYST:LOC | Sets the KPM1000 to panel operation |
SYST:OPT | Queries the optional interface boards that are installed in the KPM1000 |
SYST:REM | Sets the KPM1000 to remote mode |
SYST:RWL | Sets the KPM1000 to remote mode Locks panels keys |
SYST:VERS | Queries the version of the SCPI specifications |