SYST:DISP:CONT

Sets the measured value that is shown on the display

Command

SYSTem:DISPlay:CONTents {A|B|C|D},{V|A|W|VA|VAR|HZ|WH|WHP|WHN|TIMe|AH|PA|PV|CFA|CFV|DEGree|PF}

SYSTem:DISPlay:CONTents? {A|B|C|D}

Parameter{A|B|C|D}

Value A Display A
B Display B
C Display C
D Display D

Parameter{V|A|AHP|AHN|W|VA|VAR|HZ|WH|WHP|WHN|TIMe|AH|PA|PV|CFA|CFV|DEGree|PF}

Value Description Assignable display
V Voltage (This is the default value for display A.) A, B, C, D
A Current (This is the default value for display C.) A, B, C, D
W Active power (This is the default value for display D.) A, B, C, D
WHP Positive integrated power B, D
WHN Negative integrated power B, D
VA Apparent power (This is the default value for display B.) B, D
VAR Reactive power B, D
HZ Frequency A, C
WH Integrated power B, D
TIMe Integration time B, D
AH Integrated current B, D
PA Peak current A, C
PV Peak voltage A, C
CFA Current crest factor B, D
CFV Voltage crest factor B, D
DEGree Phase angle B, D
PF Power factor A, C

Response

Returns the measured value that is shown on the specified display in char format in response to SYST:DISP:CONT? {A|B|C|D}.

Overview

Setup

Overview of Messages

Command (function search)

Command (ABC search)

Command (Sub-system search)

Appendix

Tutorial