Introduction
The KPM1000 Communication Interface Manual explains the settings and commands for remotely controlling the KPM1000 using the communication interface.
•RS232C interface
•GPIB interface (factory option)
•USB interface (factory option)
When the KPM1000 is operating under remote control, the RMT LED on the display on the front panel illuminates. To switch from the remote mode to the local mode (panel operation) from the panel, press the LOCAL switch.
How to read this manual
This manual is in HTML format that can be viewed with a WWW (World Wide Web) browser.
Related manuals
For the safety precautions, installation, operation, and specifications of the KPM1000, read the accompanying KPM1000 User's Manual.
Intended readers
This manual is written for readers with sufficient basic knowledge of how to control instruments using a personal computer.
Structure of the manual
This manual consists of the following sections.
• Overview
• Setup
• Overview of messages
• Command (list*1)
• Appendix
• Tutorial
*1. The list of command is provided in a PDF file.
Trademarks
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other company names and product names used in this manual are trademarks or registered trademarks of the respective company.
Firmware version of the product to which this manual applies
This manual applies to products with firmware version 1.0x.
Copyright and publication
The contents of this manual may not be reproduced, in whole or in part, without the prior consent of the copyright holder.
The specifications of this product and the contents of this manual are subject to change without prior notice.
Copyright© 2011 Kikusui Electronics Corporation
IX000404, Jul. 2021