SYST:COMM:TRAC
Sets whether to execute a debug trace and display communication errors. If you turn the debug trace feature on, error numbers, such as Err-100, are shown in the KPM1000 display area.
Command
SYSTem:COMMunicate:TRACe {ON|OFF|1|0}
SYSTem:COMMunicate:TRACe?
Parameter
Value | ON (1) | Communication errors are displayed. |
OFF (0) | Communication errors are not displayed. |
Response
Returns whether communication errors are displayed in NR1 format in response to SYST:COMM:TRAC?.