SYST:LOC (RS232C and USB only)

Sets the KPM1000 to local mode (Remote Disable; the RMT LED turns off). This is a substitute command for the IEEE488.1 REN (Remote Disable) command.

The Remote Disable state enables both panel operations and commands.

Use SYST:REM or SYST:RWL to switch to remote mode (Remote Enable; the RMT LED lights).

The panel settings and configuration settings that you have made in remote mode are saved when you switch from remote mode to local mode.

Command

SYSTem:LOCal

Overview

Setup

Overview of Messages

Command (function search)

Command (ABC search)

Command (Sub-system search)

Appendix

Tutorial