TRIG:SEQ3:SOUR
TRIG:ACQ:SOUR
Sets the condition (trigger source) for actually starting the measurement after the sequence 3 group receives INIT:SEQ3 / INIT:NAME ACQ.
Command
TRIGger:SEQuence3:SOURce {IMMediate|BUS}
TRIGger:SEQuence3:SOURce?
TRIGger:ACQuire:SOURce {IMMediate|BUS}
TRIGger:ACQuire:SOURce?
Parameter
Value | IMM | Start the measurement immediately (default) |
BUS | Wait for a software trigger (*TRG, TRIG:SEQ3, TRIG:ACQ, or IEEE488.1 get (Group Execute Trigger)) to start the measurement |
For the setting that is applied when *RST is sent, see Table.
Response
Returns the trigger source of the sequence 3 group as character data in response to TRIG:SEQ3:SOUR? / TRIG:ACQ:SOUR?.