GLOB:VOLT
Sets the voltage of all the channels.
Insert a wait of at least 200 ms after sending the GLOB:OUTP subsystem command.
Command
GLOBal:VOLTage[:LEVel][:IMMediate][:AMPLitude] {<numeric>|MINimum|MAXimum}
Parameter
| Value | A value in the range of the VOLT:LIM:LOWsetting to 105 % of the rated output voltage (the default value is 0 V) |
| Unit | V |
| A SCPI error (-222, "Data out of range") occurs if outside the range. | |
Regurated DC Power Supply PWX Series