Processing Time of Commands
The command processing time is the time until the next command is accepted.
It does not include the response time of the hardware.
The processing times indicated here are typical values.
They are not guaranteed.
Unit: ms
Measurement environment
Software: Test programs written in python, KI-VISA 5.5.0, VISA-SPY disabled
PC： Core i7-4790 3.6GHz Windows7 (x64)
| Command | USB |
RS232C | LAN*3 | Description | |||
|---|---|---|---|---|---|---|---|
| *1 | *2 | VXI-11 | HiSLIP | SCPI-RAW | |||
| *IDN? | 0.34 | 25 | 4.5 | 4.75 | 2.2 | 2 | Queries the model name |
| VOLT 20 | 0.72 | 4 | 0.7 | 2.4 | 0.42 | 0.04 | Sets the voltage |
| CURR 20 | 0.72 | 4 | 0.7 | 2.4 | 0.46 | 0.3 | Sets the current |
| OUTP ON | 0.72 | 4 | 0.7 | 2.4 | 0.46 | 0.02 | Output on |
| MEAS:VOLT? | 0.42 | 15 | 2.8 | 4.75 | 2.3 | 2.57 | Queries the measured voltage output |
| MEAS:CURR? | 0.42 | 15 | 2.8 | 4.75 | 2.3 | 2 | Queries the measured current output |
*1：Data rate setting: 19200 bps.
*2：Data rate setting: 1152000 bps
*3：100BASE-TX Ethernet
Regurated DC Power Supply PWX Series