TRIG:SEQ2:DEL:OFF
TRIG:OUTP:DEL:OFF
Sets the delay for turning off the output.
Command
TRIGger:SEQuence2:DELay:OFF {<numeric>|MINimum|MAXimum}
TRIGger:SEQuence2:DELay:OFF? [{MINimum|MAXimum}]
TRIGger:OUTPut:DELay:OFF {<numeric>|MINimum|MAXimum}
TRIGger:OUTPut:DELay:OFF? [{MINimum|MAXimum}]
Parameter
| Value | 0 to 10.0 | 0 is no delay (The default value is 0.0) |
| Unit | S |
For the setting that is applied when *RST is sent, see Table.
Response
Returns the delay time until the output is turned off in the NR3 form in response to TRIG:SEQ2:DEL:OFF? / TRIG:OUTP:DEL:OFF?.