SYST:CONF:TRAC
Sets whether to display communication errors by performing a debug trace. If the debug trace function is turned on, error codes (example: Err-100) are shown on the PAT-T display.
Command
SYSTem:CONFigure:TRACe {ON|OFF|1|0}
SYSTem:CONFigure:TRACe?
Parameter
| Value | ON(1) | Display communication errors |
| OFF(0) | Not display communication errors (default) |
Response
Returns whether to display communication errors in the NR1 form in response to SYST:CONF:TRAC?.