SYST:CONF:SPH
Sets the phase input mode (Three-phase input/Single-phase input mode).
This command is available for 4 kW type products only.
Command
SYSTem:CONFigure:SPHase {ON|OFF|1|0}
SYSTem:CONFigure:SPHase?
Parameter
| Value | ON(1) | Select the Single-phase input mode |
| OFF(0) | Select the Three-phase input mode (default) |
Response
Returns the setting status of phase input mode (Single-phase input/Three-phase input mode) in the NR1 form in response to SYST:CONF:SPH?.