SYST:CONF:PST
Sets whether to output a low level signal at power on status or power off status when monitoring the power on/off status externally (through the J1 connector).
Command
SYSTem:CONFigure:PSTatus {NORMal|INVerted}
SYSTem:CONFigure:PSTatus?
Parameter
Value | NORMal | Output a low level signal while the power is on (default) |
INVerted | Output a low level signal for 10 s to 15 s when the power is off. |
Response
Returns the power on/off status as character data in response to SYST:CONF:PST?.