SYST:CONF:BTR:SHUT
Sets whether to trip the breaker (turn the POWER switch off) when an external shutdown (SD) signal is applied.
Command
SYSTem:CONFigure:BTRip:SHUTdown {ON|OFF|1|0}
SYSTem:CONFigure:BTRip:SHUTdown?
Parameter
| Value | ON(1) | Trip (turn the POWER switch off) |
| OFF(0) | Not trip (turn the output off) (default) |
Response
Returns whether to trip the breaker when the SD signal is applied in the NR1 form in response to SYST:CONF:BTR:SHUT?.