SYST:CONF:BTR:PROT
Sets whether to trip the breaker (turn the POWER switch off) when the overvoltage protection (OVP) or overcurrent protection (OCP) is activated.
Command
SYSTem:CONFigure:BTRip:PROTection {ON|OFF|1|0}
SYSTem:CONFigure:BTRip:PROTection?
Parameter
| Value | ON(1) | Trip (turn the POWER switch off) |
| OFF(0) | Not trip (turn the output off) (default) |
Response
Returns whether to trip the breaker when the OVP or OCP is activated in the NR1 form in response to SYST:CONF:BTR:PROT?.