OUTP:TRIG
Sets whether to turn the output on or off when a trigger is applied.
Command
OUTPut[:STATe]:TRIGgered {ON|OFF|1|0}
OUTPut[:STATe]:TRIGgered?
Parameter
| Value | ON(1) | Turn the output on when a trigger is applied |
| OFF(0) | Turn the output off when a trigger is applied (default) |
For the setting that is applied when *RST is sent, see Table.
Response
Returns whether the output is turned on or off when a trigger is applied in the NR1 form in response to OUTP:TRIG?.