MEM:KLOC
Sets whether preset memory values can be recalled from the panel even when the lock function is enabled. MEM:RCL allows preset memory values to be recalled regardless of this setting.
Command
MEMory:KLOCk {ON|OFF|1|0}
MEMory:KLOCk?
Parameter
| Value | ON(1) | Unable to recall preset memory values in the locked condition (Default) |
| OFF(0) | Able to recall preset memory values in the locked condition |
For the setting that is applied when *RST is sent, see Table.
Response
Returns whether recalling of the preset memory is allowed when the keys are locked in the NR1 form in response to MEM:KLOC?.