SENS:VOLT:SCAL:PTR
Sets the scaling PT ratio.
This command is valid when voltage scaling has been enabled (SENS:VOLT:SCAL has been sent with parameter ON).
Command
SENSe:VOLTage:SCALing:PTRatio {<numeric>|MINimum|MAXimum}
SENSe:VOLTage:SCALing:PTRatio? [{MINimum|MAXimum}]
Parameter
Value | 1 to 2000 (The default value is 1.) |
Table shows the setting that is specified when *RST is sent.
Response
Returns the PT ratio in NR3 format in response to SENS:VOLT:SCAL:PTR?.