SENS:VOLT:RANG:AUTO

Sets the auto voltage range on/off status

Command

SENSe:VOLTage:RANGe:AUTO {ON|OFF|1|0}

SENSe:VOLTage:RANGe:AUTO?

Parameter

Value ON (1) The auto voltage range feature is turned on (this is the default value).
  OFF (0) The auto voltage range feature is turned off.

Table shows the setting that is specified when *RST is sent.

When you send the SENS:VOLT:RANG command, this setting is set to OFF.

Response

Returns the auto voltage range feature on/off status in NR1 format in response to SENS:VOLT:RANG:AUTO?.

Overview

Setup

Overview of Messages

Command (function search)

Command (ABC search)

Command (Sub-system search)

Appendix

Tutorial