SENS:CURR:SCAL:CTR
Sets the scaling CT ratio.
This command is valid when current scaling has been enabled (SENS:CURR:SCAL has been sent with parameter ON).
Command
SENSe:CURRent:SCALing:CTRatio {<numeric>|MINimum|MAXimum}
SENSe:CURRent:SCALing:CTRatio? [{MINimum|MAXimum}]
Parameter
Value | 1 to 2000 (The default value is 1.) |
Table shows the setting that is specified when *RST is sent.
Response
Returns the CT ratio in NR3 format in response to SENS:CURR:SCAL:CTR?.