SENS:CURR:SCAL
Sets the current scaling on/off status
Use SENS:CURR:SCAL:CTR to set the CT ratio.
Command
SENSe:CURRent:SCALing[:STATe] {ON|OFF|1|0}
SENSe:CURRent:SCALing[:STATe]?
Parameter
Value | ON (1) | The scaling is turned on. |
OFF (0) | The scaling is turned off (this is the default value). |
Table shows the setting that is specified when *RST is sent.
Response
Returns the current scaling on/off status in NR1 format in response to SENS:CURR:SCAL?.