SENS:CURR:RANG:AUTO
Sets the auto current range on/off status
Command
SENSe:CURRent:RANGe:AUTO[:STATe] {ON|OFF|1|0}
SENSe:CURRent:RANGe:AUTO[:STATe]?
Parameter
| Value | ON (1) | The auto current range feature is turned on (this is the default value). |
| OFF (0) | The auto current range feature is turned off. |
Table shows the setting that is specified when *RST is sent.
When you send the SENS:CURR:RANG command, this setting is set to OFF.
Response
Returns the auto current range feature on/off status in NR1 format in response to SENS:CURR:RANG:AUTO?.