SENS:CURR:RANG
Sets the current range.
When you use this command to set the range, the auto current range feature (SENS:CURR:RANG:AUTO) is turned off.
Command
SENSe:CURRent:RANGe[:UPPer] {<numeric>|MINimum|MAXimum}
SENSe:CURRent:RANGe[:UPPer]? [{MINimum|MAXimum}]
Parameter
| Value | 5m, 10m, 20m, 50m, 100m, 200m, 500m, 1, 2, 5, 10, 20 (The default value is 20.) |
| Unit | A |
Table shows the setting that is specified when *RST is sent.
Response
Returns the current range in NR3 format in response to SENS:CURR:RANG?.