TRIG:TRAN:SOUR
Sets the condition (trigger source) for actually changing the setting after the PWX receives INIT:TRAN.
Command
TRIGger:TRANsient:SOURce {IMMediate|BUS}
TRIGger:TRANsient:SOURce?
Parameter
| Value | IMM | The setting is changed immediately. |
| BUS | The setting is changed when a software trigger is received (use the *TRG or TRIG:TRAN command to change the setting; default). |
For the setting that is applied when *RST is sent, see this table.
Response
Returns the trigger source of the sequence 1 group in CHAR format in response to TRIG:TRAN:SOUR?.
Regurated DC Power Supply PWX Series