GLOB:CURR
Sets the current of all the channels.
Insert a wait of at least 200 ms after sending the GLOB:OUTP command.
Command
GLOBal:CURRent[:LEVel][:IMMediate][:AMPLitude] {<numeric>|MINimum|MAXimum}
Parameter
| Value | 0 % to 105 % of the rated output current (The default value is 105 % of the rated output current.) |
| Unit | A |
| A SCPI error (-222, "Data out of range") occurs if outside the range. | |
Regurated DC Power Supply PWX Series