CURR:TRIG
Sets the current value that is applied when INIT:TRAN and a software trigger are sent.
Command
[SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude] {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent[:LEVel]:TRIGgered[:AMPLitude]? {MINimum|MAXimum}
Parameter
| Value | 0 % to 105 % of the rated output current (The default value is 105 % of the rated output current.) |
| Unit | A |
| A SCPI error (-222, "Data out of range") occurs if outside the range. | |
For the setting that is applied when *RST or *RCL is sent, see this table.
Response
Returns the current value that is applied when a trigger is received in NR3 format in response to CURR:TRIG?.
Regurated DC Power Supply PWX Series