Time offset between channels for the GLOB:OUTP command
The GLOB:OUTP command turns on/off the output of all configured channels, but they are not turned on/off at the same time. There is a slight time offset between channels.
NOTE
| The time offset varies depending on the number of PWX units in the multi-channel configuration and the network conditions. |
As a reference, the waveforms are shown for the following measurement environment.
Measurement environment
Software： KI-VISA 5.0.4
PC：CoreDuo 1.66GHz WindowsXP(x86)
Interface: LAN
PWX750MLF: 3 units
Regurated DC Power Supply PWX Series