Legacy Languages and Emulation

PWX supports legacy languages. When you need to execute existing programs written for other instruments, for example, you can set the legacy language and emulation settings accordingly. By factory default, the language is set to SCPI (CF21 : SCPi), and emulation is turned off (CF22 : nonE). Normally, you do not need to cange the default settings.

These settings do not guarantee compatibility with all measuring instrument application software and drivers.

When you have selected the SCPI language, you can select to emulate the commands for 1) the N5700/N5800 series made by Agilent Technologies, 2) the Genesys series made by TDK-Lambda, or 3) the PAG series made by Kikusui.

When you have selected the RS232C language, you can select to emulate the commands for non-SCPI operation for 1) the Genesys series made by TDK-Lambda or 2) the PAG series made by Kikusui.