TRIG:SEQ4:SOUR/ TRIG:SIM:SOUR
Sets the condition (trigger source) that determines when the sequence 4 group actually executes a sequence operation after the PCR receives the INIT:SEQ4 SIM or INIT:NAME SIM command.
Command
TRIGger:SEQuence4:SOURce {IMMediate|BUS}
TRIGger:SEQuence4:SOURce?
TRIGger:SIMulation:SOURce {IMMediate|BUS}
TRIGger:SIMulation:SOURce?
Parameter
| Value | IMM | The sequence operation starts immediately (default). |
| BUS | The PCR waits for a software trigger (a *TRG, TRIG:SEQ2, or IEEE 488.1 get (Group Execute Trigger) command), and then the sequence operation starts. |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the sequence 4 group's trigger source in CHAR format in response to TRIG:SEQ4:SOUR? or TRIG:SIM:SOUR?.
AC Power Supply PCR-LE series