DISP:AMM
Sets the measured value displayed on the lower numeric display.
Command
DISPlay:AMMeter "{RMS|AVG|PEAK|WATTage}"
DISPlay:AMMeter?
Parameter
| Value | "RMS" | Current (default) |
| "AVG" | Moving average of the current | |
| "PEAK" | Peak current | |
| "WATT" | Wattage |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the lower meter display value in string format in response to DISP:AMM?.
AC Power Supply PCR-LE series