FUNC:SOUR
Select which signal source to use to control the PCR-LE/ PCR-LE2 Series.
This command is valid in amplifying the input waveform (optional).
This command is valid in single-phase three-wire output or three-phase output (optional).
Single-phase three-wire output or Three-phase output (PCR-LE optional): Sets the signal source of all phases at once.
This command is not valid when the output is on (OUTP ON).
Command
[SOURce:]FUNCtion:SOURce {INTernal|EXTernal|SUM}
[SOURce:]FUNCtion:SOURce?
Parameter
| Value | INTernal | Internal signal source |
| EXTernal | External signal source | |
| SUM | Internal and external signal sources |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the signal source in character data format in response to FUNC:SOURFUNC:SOUR?.
AC Power Supply PCR-LE series