DISP:MMOD:VOLT
Sets the measured voltage display.
Command
DISPlay:MMODe:VOLTage {RMS|PEAK|AVG}
DISPlay:MMODe:VOLTage?
Parameter
| Value | RMS | The rms measured voltage is displayed (default). |
| PEAK | The peak measured voltage is displayed. | |
| AVG | The averaged voltage is displayed (only in DC mode and AC+DC mode). |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the measured voltage that is being displayed in CHAR format in response to DISP:MMOD:VOLT?.
AC Power Supply PCR-LE series