SENS:UPD:CYCL
Sets the panel display update period.
Command
SENSe:UPDate:CYCLe {<numeric>|MINimum|MAXimum}
SENSe:UPDate:CYCLe? [{MINimum|MAXimum}]
Parameter
Value | 0.1, 0.2, 0.5, 1.0, 2.0, 5.0, 10.0 | This is the time between updates (the default value is 0.1). |
Unit | S |
Table shows the setting that is specified when *RST is sent.
Response
Returns the update period in NR3 format in response to SENS:UPD:CYCL?.