SENS:FILT:FREQ
Turns the frequency filter on and off.
Command
SENSe:FILTer:FREQuency[:STATe] {ON|OFF|1|0}
SENSe:FILTer:FREQuency[:STATe]?
Parameter
Value | ON (1) | The filter is turned on (this is the default value). |
OFF (0) | The filter is turned off. |
Table shows the setting that is specified when *RST is sent.
Response
Returns the frequency filter on/off status in NR1 format in response to SENS:FILT:FREQ?.