SENS:AVER:COUN
Sets the averaging count.
Command
SENSe:AVERage:COUNt {<numeric>|MINimum|MAXimum}
SENSe:AVERage:COUNt? [{MINimum|MAXimum}]
Parameter
Value | 1, 2, 4, 8, 16, 32, 64 (The default value is 1.) |
Table shows the setting that is specified when *RST is sent.
Response
Returns the averaging count in NR3 format in response to SENS:AVER:COUN?.