Command (Sub-system search)
OUTPut/INPut subsystem
| INP OUTP |
Sets load on/off. Only when load is set to on, the duration to keep the load turned on can be specified. |
|---|---|
| INP:EXT:LOG OUTP:EXT:LOG |
Sets the signal logic for external control input |
| INP:MSYN OUTP:MSYN |
Synchronizes the load on/off operation on synchronized PLZ-5Ws |
| INP:MSYN:ACC OUTP:MSYN:ACC |
Sets whether to accept load on/off sync signal (IMP:MSYN) input from other synchronized devices |
| INP:PON:STAT OUTP:PON:STAT |
Sets the panel setting state at power-on |
| INP:PROT:CLE OUTP:PROT:CLE |
Clears the protection mode |
| INP:PROT:WDOG OUTP:PROT:WDOG |
Enables/disables the watchdog protection function |
| INP:PROT:WDOG:DEL OUTP:PROT:WDOG:DEL |
Sets the delay time of the watchdog protection function |
| INP:SHOR OUTP:SHOR |
Sets the short function on/off |
Electronic Load PLZ-5W series