CURR:PULS:LEV
Sets the switching current.
During switching operation, two settings are executed repetitively.
The CURRent setting value is applied as the setting for the first value of the set of two values, and this setting value here is applied for the second value of the set of two values.
Command
[SOURce:]CURRent[:LEVel]:PULSe:LEVel {<numeric>|MINimum|MAXimum}
[SOURce:]CURRent[:LEVel]:PULSe:LEVel? [{MINimum|MAXimum}]
Parameter (Unit: A)
| *RST transmission | 0.0 |
|---|
Response
Returns the switching current in NR3 format in response to the CURR:PULS:LEV? query.
Electronic Load PLZ-5W series