PLZ-5W Series Electronic Load

Commnunication Interface Mannual

 

CURR:PROT

Sets the current value for overcurrent protection (OCP).

Command

[SOURce:]CURRent:PROTection[:LEVel][:UPPer] {<numeric>|MINimum|MAXimum}

[SOURce:]CURRent:PROTection[:LEVel][:UPPer]? [{MINimum|MAXimum}]

Parameter

PLZ205W PLZ405W PLZ1205W
Setting range 0.0A to 44.0A 0.0A to 88.0A 0.0A to 264.0A
Resolution 10mA 10mA 10mA

During *RST transmission, all MAXimum

Response

Returns the current value for overcurrent protection (OCP) in NR3 format in response to the CURR:PROT? query.

Setup

Overview of Command

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

Electronic Load PLZ-5W seriesElectronic Load PLZ-5W series
Communication Interface Manual