RMT CONT SOFTWARE FOR PCR-LE/PCR-WE SD021-PCR-LE
Operation Guide
Alarms
When a PCR protection function is activated, an alarm occurs. Clear the alarm, and then fix the problem that caused the alarm. For details on alarms, see the operation manual for the PCR series.
Clearing alarms
Tap Alarm Clear to clear an alarm.
Status shows the PCR’s register status. If an alarm or problem other than those listed below occurs, it is not displayed under Status.
Alarm |
Symptom |
OVP |
Overvoltage protection activated |
OCP |
Overcurrent protection activated |
UNIT FAIL |
Device error occurred |
UVP |
Undervoltage protection activated |
OHP |
Overheat protection activated |
OCP2 |
Overcurrent internal semiconductor protection activated (PCR-LE only) |
OPP |
Overpower protection activated |
RMT CONT SOFTWARE FOR PCR-LE/PCR-WE SD021-PCR-LE
Operation Guide