CURRENT SENSING terminal
Selects channel 1 or 2 of the CURRENT SENSING terminal. Normally, use channel 1.
Command
INPut:SENSing:CURRent {1|2}
INPut:SENSing:CURRent?
Parameter
| Value: | 1 | Channel 1 (default) |
| 2 | Channel 2 |
Table 4 shows the setting that is specified when *RST or *RCL is sent.
Response
Returns the selected channel number in the NR1 form in response to INP:SENS:CURR?.