PCR500M/ PCR4000M: Four locations on the bottom

PCR1000M/ PCR2000M: Four locations on the bottom, four locations on the side.

Front panel output

Air inlet for internal cooling. A dust filter is built in.

Handle for transporting

Reset button of the circuit breaker.

Illuminates when and alarm or overload occurs.

The selected mode illuminates (AC, DC, or EXT).

Displays voltage or frequency.

Displays current or power. Displays the frequency when the memory is used.

Illuminates when the key is locked or when in remote mode.

RMS, PEAK, or AVG illuminates according to the type of value shown on the numeric display.

The selected memory (A, B, or C) illuminates.

MEMORY illuminates when saving settings and blinks when recalling settings.

The selected voltage range (135 V, 270 V, or AUTO) illuminates.

Selects the type of value shown on the lower numeric display (RMS, PEAK, AVG, or W).

Sets the voltage range.

Sets the limit value. The key illuminates when active.

Clears alarms.

Changes the settings.

Saves to the memory (memories A, B, or C).

Locks the keys

Recalls from memory.

Confirms memory recall or storage.

Turns the output on/off.

Sets the configuration.

Switches to local mode.

SHIFT key

Sets the frequency. The key illuminates when active.

Sets the voltage. The key illuminates when active.

Selects the output mode.