AC Power Supply PCR-LE series

AC Power Supply PCR-LE2 series

AC Power Supply PCR-M series

Commnunication Interface Mannual

 

VOLT:PROT:LEV (PCR-LE/ PCR-LE2 only)

Sets the OVP value used to judge rms voltage measurements.

This command is valid in AC or AC+DC mode (OUTP:COUP AC|ACDC).

For single-phase three-wire怀and three-phse (PCR-LE optional), set this value with the phase voltage.

Command

[SOURce:]VOLTage:PROTection:LEVel[:UPPer] {<numeric>|MINimum|MAXimum}

[SOURce:]VOLTage:PROTection:LEVel[:UPPer]? [{MINimum|MAXimum}]

Parameter

Value 0 to 474.1 (474.1 by default)
A SCPI error (-222, "Data out of range") occurs if outside the range.
Unit V

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

Response

Response

Returns the OVP value in NR3 format in response to VOLT:PROT:LEV?.

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

AC power supply PCR-M seriesAC Power Supply PCR-LE series
Communication Interface Manual

AC power supply PCR-M seriesAC Power Supply PCR-LE2 series
Communication Interface Manual

AC power supply PCR-M seriesAC Power Supply PCR-M series
Communication Interface Manual