VOLT:OFFS:LINE
Sets the DC line voltage.
This command is valid in DC mode (OUTP:COUP DC).
If the EX05-PCR-LE is in use (optional) and the signal source is set to external signal source (FUNC:SOUR EXT), this command is invalid.
Command
[SOURce:]VOLTage:OFFSet[IMMEediate] {<numeric>|MINimum|MAXimum}
[SOURce:]VOLTage:OFFSet[IMMediate]? [{MINimum|MAXimum}]
Parameter
| Value | L range： -431.0 to 431.0 H range： -862.0 to 862.0 A SCPI error (-222, "Data out of range") occurs if outside the range. The default value is 0. |
| Unit | V |
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
For the setting that is applied when *RST is sent, see this table
Response
Response
Returns the DC line voltage setting in NR3 format in response to VOLT:OFFS:LINE?.
AC Power Supply PCR-LE series