AC power supply PCR-LE2 series

Basic


Setting the Frequency

You can set the frequency in AC mode and AC+DC mode. The F key is disabled in DC mode.

You can set the frequency while output is on or off.

Set the frequency limit to prevent the PCR-LE2 Series from generating a frequency that is greater than is necessary.

Frequency setup procedure

Press F and then FREQ (F1) to set the frequency.

20905.jpg 

Item

Title

Description

Valid modes

FREQ

Freq

Sets the frequency (1.00 Hz to 999.9 Hz)

AC and AC+DC

 

TOP

AC power supply PCR-LE2 seriesAC power supply PCR-LE2 series
Basic